Wednesday, August 19, 2009

I'm really unqualified to be doing this

So I've got my shower framed in. What it needs is some plumbing. Actually, so does the toilet, the tub and the sinks but the shower is what I'm most afraid of. My dad always said, when it comes to home improvement, face your fear. Actually, that may be been Tim "the tool man" Taylor. Anyway, I was more or less excited to get this going so today I started plumbing.


First I made sure Jen was on ready alert with the fire extinguisher. Next I returned to the scary crawl space and ran a line from down there up through the floor. There was some drilling involved but by now I had purchased a dill bit set and was well equipped. The tools I keep buying by the way, yeah, they're not in the budget. Jen's been pretty understanding so far. Might be the medication.


Okay, so during this time there were some four trips to HD, Lowes, McGukins and HD again. Mostly because when the shower fixtures come, they come with the valves and the valves don't have installtion instructions. They just figure that a certified plumber is going to be doing this work, not a cheap bastard with a MAPP tortch.


I plumbed up to the main temperature control valve. Sounds cool eh? So we'll one day have a shower that has separate temperature and volume (on to off) valves. I put that on and then realized I better brace it pretty quickly because it weighs some 20 pounds (or thereabouts).


There are three sections from here. One goes off the the right to an on/off valve and then on to the normal shower head. The other goes to another on/off and then to an over head shower head called "Rain." It's four shower heads all combined in one. I've never seen it working. Just looks awesome. The last are two body spays that are mounted on the wall. All of these are flat. That is, they don't stick out from the wall. They're called water tiles. Kohler makes them. They're cool. I'm hoping I don't break them.


I'm sweating all of this 3/4 pipe to brass fittings. The trick here is to get it hot enough to melt the solder but not melt the wee plastic pieces inside the expensive valves. My problem in the past also included welding one angle but through heating it up, weakening the weld I just made. Basically, I worked quickly and used a wet towel to cool the previous weld. I'd like to say I never made a mistake, but that just wouldn't be my style. But through carefully measuring, cutting, sweating, breaking the welds, cleaning measuring again, cutting and sweating again, I got it done.


Now, here's the fun part. I can't check the welds. If I turn water on, well water might come out and go all over my unfinished shower. There are plugs that I can buy to screw into the valves and then turn it on. I may need to do that. Anyway, this is done. Until I find out it leaks. Then I won't be all that done.

No comments:

Post a Comment