Today began as most do with a trip to HD. By the way, Lowes is only marginally farther away but I found that by shopping at just one store for most of the stuff I wouldn't have to remember where something came from when I wated to return it.
So now I know where the drain goes. It goes down over there and then meets up with the drain from a sink or something, then sort of goes over there and meets up with a large, vertical tube called the Main Stack. All of the tubing I'm removing has served for 35 years carrying stuff I don't want to think about so I tried to get Jen to make the cuts. That didn't work so I doubled up on my gloves, put on my welding mask and a hoodie and got down to business.
Now at this point in the game the studs are exposed, and I've torn up a section of the floor and exposed the crawl space below. The exsiting waste tubing is there, along with the exisitng fresh water piping, electrical, and a lot of HVAC. I pasted the Plumber Tom Approved Plan up on the wall to give me comfort that I wasn't destroying my house and began cutting. During this
process, I went to HD three times, purchasing parts and returning pieces that I didn't think I needed but later purchased again. One other note on going to the same place to buy supplies. The people there get to know you and you get to know them. I was able to determine who was a really good plumber and who was just some shmo assigned to the plumbing section. Over the last while we've gotten to know each other a bit and a couple of the good ones have given me some good tips and verified the information I got from the internet.
The good thing about working with tubing is that it goes together super easily. The bad thing is that the glue actually bonds with the plastic and becomes one, so this stuff is never coming apart. Once you goof, you're cutting. I cutted.
Now at this point in the game the studs are exposed, and I've torn up a section of the floor and exposed the crawl space below. The exsiting waste tubing is there, along with the exisitng fresh water piping, electrical, and a lot of HVAC. I pasted the Plumber Tom Approved Plan up on the wall to give me comfort that I wasn't destroying my house and began cutting. During this
The good thing about working with tubing is that it goes together super easily. The bad thing is that the glue actually bonds with the plastic and becomes one, so this stuff is never coming apart. Once you goof, you're cutting. I cutted.
I'm getting more comfortable crawling around in the crawl space. It kind of creeped me out at first but with some of the floor removed and the radio on, the 2 1/2 foot dirt area is becoming more familiar.
By the end of the day, I had my level out and measuring tape to ensure the proper downslope. Turns out that too much slope can be bad too, so there's an actual need for accuracy. I had to move one of my HVAC vents that was in the way (that means a completely different trip to HD). The waste tubing is all in there now.
No comments:
Post a Comment